Ultrarinse Tank HM1009
After components have been ultrasonically cleaned they need to be rinsed in another solution to remove any loose particles. Original Equipment Manufacturers typically call for a class (0) cleanliness specification for this operation. The Ultrarinse Tank HM1009 offers a low cost solution for this, both in the initial investment and running costs as the cleaning medium is standard calibration fluid filtered to 2 micron. Furthermore the Ultrarinse Tank provides the ability to carry out lubricated wet assembly which is a prerequisite of Original Equipment Manufacturers. The Ultrarinse Tank HM1009 has been designed to fit inside the Microdiesel Cabinet HM1000, which completes a full “clean room” and assembly station for the latest generation diesels. However, the tank will sit equally as well on a standard workbench and work as a stand alone unit.
Main Features
- Cleanses surface residue following ultrasonic cleaning.
- Prepares parts for re-assembly into pumps or injectors etc.
- Facilitates wet assembly.
- 9 litre capacity.
Benefits
- Enhances the use of the Microdiesel Cabinet HM1000.
- Affordable solution.
Ordering
HM1009 Ultrarinse Tank
Shipping
| Gross Weight: | 18 kgs |
| Net Weight: | 12 kgs |
| Case Size: | 65 x 35 x 45 cms |
Microdiesel Hartclean Cleaning Solution HM1006
This solution can be used in both the Microdiesel Rotary Washer and Ultrasonic Tanks at a ratio of 10% fluid / 90% water.
Downloads